Tuopu Industry(Jiangsu) Co., Ltd.

Tuopu Industry(Jiangsu) Co., Ltd.

liuli@topicn.com

86-523-84982279

Tuopu Industry(Jiangsu) Co., Ltd.
HomeProducts

All Products (Total 183 Products)

Steam superheater for Ethylbenzene Unit

standard: Aisi, Astm, Din, Gb, Jis

Fired Heater Steam Superheater Furnace/Fired Steam Superheaters Benefits of using a Fired Steam Superheater The efficiency of the process heating system is optimized. Condensation formation in the steam distribution system is reduced. The risk of water hammer or mechanical damage is alleviated. Pipework sizing is...
Stability industry medical waste incinerator

Model No.: TOPICN13015

Fired Heater Steam superheatng for furnace for 320KTA Ethylbenzene/styrene unit for SP Chemicals TOPICN13011 Waste Combustion Systems Our society's trash and waste continues to increase in complexity and quantity. Plastics and other synthetic materials that resist natural decomposition create a greater threat to the...
Waste heat boiler WHB for CCU

Model No.: TOPICN13019

standard: Aisi, Astm, Din, Gb

Fired Heater Hydrogen generation reformer 8000m3/h for SINOPEC Taizhou Company TOPICN13012 Steam reformer contains banks of catalyst filled tubes operating at temperatures around 850 to 1000oC to produce hydrogen or mixtures of hydrogen and carbon monoxide for use in further processes.Reformer Furnace The tubes are...
Centrifugal casting catalyst tube

Model No.: TOPICN13022

standard: Aisi, Astm, Din, Gb

Centrifugal casting catalyst tube TOPICN13023 The centrifugal casting catalyst tube, characteristic of heat resistance and wear resistance, used on hydrocarbon steam reforming furnace is widely used in oil refinery, chemical plant and metallurgy industry such as DRI plant. The petrochemical industry has a big demand...
Twisted tube of cracking tube

Model No.: TOPICN13027

Twisted tube of cracking tube TOPICN13027 Manufacturing process: centrifugal casting Material: ZG40Cr25Ni35Nb, ZG40Cr35Ni45Nb, HP-Nb, HT50,GX40NiCrSiNb35-26,GX40NiCrNb45-35, G-NiCr28W and SCH24XNb etc Manufacturing standards: 1. The design requirements of the customer and engineering company. 2. Centrifugal casting:...
U tube for cracking tube

Model No.: TOPICN13028

U tube for cracking tube TOPICN13028 Manufacturing standards: 1. The design requirements of the customer and engineering company. 2. Centrifugal casting: HG/T 2601, ASTM A608, DIN 10295,JIS G5122, etc. 3. Forgings: To drawing and design 4. Standard for rolled pipe: To drawing and design Manufacturing process:...
Tube fitting for cracking tube

Model No.: TOPICN13029

Tube fitting for cracking tube TOPICN13029 Manufacturing standards: 1. The design requirements of the customer and engineering company. 2. Centrifugal casting: HG/T 2601, ASTM A608, DIN 10295,JIS G5122, etc. 3. Forgings: To drawing and design 4. Standard for rolled pipe: To drawing and design Manufacturing process:...
Palm fitting for cracking tube

Model No.: TOPICN13030

Palm fitting for cracking tube TOPICN13030 Manufacturing standards: 1. The design requirements of the customer and engineering company. 2. Centrifugal casting: HG/T 2601, ASTM A608, DIN 10295,JIS G5122, etc. 3. Forgings: To drawing and design 4. Standard for rolled pipe: To drawing and design Manufacturing process:...
Centrifugal Casting Tube Coil

Model No.: TOPICN13036

standard: Aisi, Astm, Din, Gb

Tube Coil TOPICN13036 Manufacturing standards: 1. The design requirements of the customer and engineering company. 2. Centrifugal casting: HG/T 2601, ASTM A608, DIN 10295,JIS G5122, etc. 3. Static casting: HG/T 3673, ASTM A351, etc. 4. Forgings: To drawing and design 5. Standard for rolled pipe: To drawing and design...
Steel flange for reformer tube

Model No.: TOPICN13040

Whether alloy: Is Alloy

Item: Flange for reformer tube TOPICN13040 Material: ZG40Cr25Ni35Nb,ZG40Cr35Ni45Nb,HP-Nb,HT50,GX40NiCrSiNb35-26,GX40NiCrNb45-35,G-NiCr28W,SCH24XNb Products: Hydrogen generation reformer tubes Ethylene Cracking tubes Centrifugal casting tube Cast tube sheets Cast Brackets and guides Cast Return bends & plug Headers...
Insulation cap for reformer tube

Model No.: TOPICN13037

Whether alloy: Is Alloy

Item: Insulation cap for reformer tube TOPICN13040 Material: ZG40Cr25Ni35Nb,ZG40Cr35Ni45Nb,HP-Nb,HT50,GX40NiCrSiNb35-26,GX40NiCrNb45-35,G-NiCr28W,SCH24XNb Products: Hydrogen generation reformer tubes Ethylene Cracking tubes Centrifugal casting tube Cast tube sheets Cast Brackets and guides Cast Return bends & plug...
Heavy plate heat treatment furnace roller

Model No.: TOPICN13046

Heavy plate heat treatment furnace roll: used on normalizing furnace and quenching furnace. Under the nitrogen and hydrogen protection atmosphere, temperature at 550-950 ℃ in the furnace,the wide and heavy plate is rapidly and uniformed heat treated. Diameter: 300-400mmm. Barrel: centrifugal casting Transition...
Sink roll for galvanizing line

Model No.: TOPICN13049

standard: Astm, Bs, Gb, Jis

Furnace Roll: used for galvanizing line zinc pot system. The galvanizing process will be carried out by continuous galvanizing through “three rollers & six arms”. The three rollers in the zinc pot are all passive rollers. The barrel is centrifugal casting, shaft is static casting. The main materials usually choose...
Water seal roll for normalizing furnace

Model No.: TOPICN13050

standard: Aisi, Astm, Din, Gb

Item: Water seal roll TOPICN130052 Application: The furnace roll are usually used for normalizing furnace and hardening furnace, under the hydrogen nitrogen protective environment, CGL (Continuous hot dip galvanizing line),Plating aluminizing line, Plating silicon line. Process:Centrifugal/spun casting method for roll...
Water cooling roll for plate heating furnace

Model No.: TOPICN13053

standard: Aisi, Astm, Din, Gb

Item: Water cooling roll TOPICN130054 Material: 316L,316,HK,HT,HU,HP,HH,ZG40Cr25Ni20Si2,ZG14Ni32Cr20Nb,ZG45Ni48Cr28W5Si2 Application: The furnace roll are usually used for normalizing furnace and hardening furnace, under the hydrogen nitrogen protective environment, CGL (Continuous hot dip galvanizing line),Plating...
Continuous cast roll for plate heating furnace

Model No.: TOPICN13055

standard: Aisi, Astm, Din, Gb

Item: Continuous cast roll TOPICN130055 Specification: Outer diameter: 55mm-2000mm Material: 316L,316,HK,HT,HU,HP,HH,ZG40Cr25Ni20Si2,ZG14Ni32Cr20Nb,ZG45Ni48Cr28W5Si2 Application: The furnace roll are usually used for normalizing furnace and hardening furnace, under the hydrogen nitrogen protective environment, CGL...
Heat resistant Grate Bar Casting for furnace parts

Model No.: TOPICN13067

standard: Aisi, Astm, Din, Gb

Item:Heat resistant Grate Bar Casting for furnace parts TOPICN13067 Usage: Used in all furnace types and hearth designs. Feature:Heat and corrosion resistant alloy Testing: Chemical analysis by spectrometer for each heat, PT 100%(liquid penetrant test), VI(visual inspect)100%, dimensional check. Material:...
Rubber coated roll TOPICN13058

Model No.: TOPICN13058

Machined Casting Rubber coated roll TOPICN13058 Hardness(Shore): 30-90 Working temperature: -50℃~+250℃ Percentage elongation at rupture (%)<150 Feature: Heat resistance and cold resistance Machined Parts Machined Casting Parts
Rubber Press Roll for Paper Making

Model No.: TOPICN13059

Machined Parts Rubber Press Roll for Paper Making TOPICN13059 Rubber Press Roll is applied in paper machinery, it is important to provide good elasticity and ease the pressing effect of the upper press roll on the wet paper and felt, thereby prolonging the service life of the felt and reducing the "compression" of the...
High Efficiency Steel Rolling Mill Rolls

Model No.: TOPICN13060

High Efficiency Steel Rolling Mill Rolls TOPICN13060 Machined Casting Application: Bar & wire rod mill, section mill etc. Forged Steel Roll Process: Forging/Casting - Normalizing & Tempering - Proof Machining- Quenching & Tempering -Subzero treatment -- Finish Machining Machined Casting Parts
Back up roll for rolling mill

Model No.: TOPICN13062

standard: Aisi, Astm, Din, Gb

Machined Parts Back up roll for rolling mill TOPICN13061 Machined Casting Parts Application: work roll, intermediate roll, back-up roll for cold rolling mill, hot rolling mill. Work roll: 9Cr2Mo, 9Cr3Mo, MC3, MC5 etc. Intermediate rolls: 9Cr2Mo, 9Cr3Mo, MC3, MC5 etc. Back-up roll: Cr2, Cr3, Cr5, 60CrMo, 60CrMnMo etc....
Casting sieve plate for sintering plant

Model No.: TOPICN13070

standard: Aisi, Astm, Din, Gb

Item:Cold sieve plate tray for sintering plant TOPICN13070 Usage: Used in sintering plant. Testing: Chemical analysis by spectrometer for each heat, PT 100%(liquid penetrant test), VI(visual inspect)100%, dimensional check. Feature:Heat and corrosion resistant alloy. Material:...
high quality Reformer tube for DRI

Model No.: TOPICN13085

standard: Aisi, Astm, Din, Gb

Reformer tube for DRI TOPICN13085 DRI Reformer Tube Direct reduction iron is the low carbon porous substances formed by fine iron powder or iron oxide in the furnace through low temperature reduction. The content is stable and has fewer impurities which are used as raw materials of steel making for electric arc...
Tube bundle for air recuperator

Model No.: TOPICN13087

standard: Aisi, Astm, Din, Gb

DRI Reformer Tube Tube bundle TOPICN13087 Reformer Tube Material -Air recuperator parallel flow hot -Air recuperator parallel flow cold -Natural gas heater tube bundle -Feed gas heater hot tube bundle -Feed gas heater cold tube bundle Cast Refomer Tube
Home > Products
Related Products List

Home

Product

Whatsapp

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send