Page-3 All Products - Fired Heater,Reformer Tube,Catalyst Tube,Convection Section,Centrifugal Casting Furnace Tube,Pressure Vessel

Centrifugal casting W type radiant tubes for CAL

قیمت واحد: USD 1000 / Piece/Pieces

Min.Order	قیمت واحد
1 Piece/Pieces	USD 1000 / Piece/Pieces

حداقل سفارش: 1 Piece/Pieces

مدل شماره: TOPICN600110

Item: Centrifugal casting W type radiant tube for CAL TOPICN600110 Process: Centrifugal casting method for tube sections. Shapes: U-type, W-Type, I Type. High Nickel and high Chrome heat resistant alloys, Cobalt base alloys, like. Material:...

اکنون تماس بگیرید

Radiant Tube for Industrial Furnace

standard: Aisi, Astm, Din, Gb, Jis

Best Radiant Tube Heaters Commonly used as a heating equipment in industrial furnace, radiant tube could significantly reduce the foundation building and operating cost, improve production efficiency, and extend service life. Because of that, the properties of radiant tubes are as follows：1）easy to maintain, repair...

اکنون تماس بگیرید

Industrial High Performance Furnace Rolls

standard: Astm, Bs, Gb, Jis

tolerance: ±1%

Hearth rolls are large-diameter hearth rolls for continuous annealing production lines. The diameter:600-1500mm The barrel: centrifugal casting Transition section: static casting Shaft: forging. Common material: Shaft (SUS304, 1Cr18Ni9Ti, etc.), barrel and shaft neck (ZG30Cr26Ni12, ZG40Cr25Ni20Si2, ZG14Ni32Cr20Nb,...

اکنون تماس بگیرید

Elbow with complete specifications

standard: Aisi, Astm, Din, Gb

Whether alloy: Is Alloy

Elbow for radiant tube Process: static casting W type radiant tube:mostly used on continuous annealing, vertical annealing furnace of galvanizing lines. In the nitrogen and hydrogen protection atmosphere, burning of natural gas or coke oven gas inside the tube heat the strip steel from room temperature to...

اکنون تماس بگیرید

Radiant Tubes for Industrial Heating Furnaces

standard: Aisi, Astm, Din, Gb

Whether alloy: Is Alloy

W type radiant tube TOPICN13043 Radiant Heater Tube W type radiant tube:mostly used on continuous annealing, vertical annealing furnace of galvanizing lines. In the nitrogen and hydrogen protection atmosphere, burning of natural gas or coke oven gas inside the tube heat the strip steel from room temperature to...

اکنون تماس بگیرید

high quality Tube bundle for DRI

مدل شماره: TOPICN13088

standard: Aisi, Astm, Din, Gb

Tube bundle for DRI TOPICN13088 Reformer Catalyst Tube Cast Refomer Tube -Feed gas heater cold tube bundle -Natural gas heater tube bundle -Feed gas heater hot tube bundle -Air recuperator parallel flow hot -Air recuperator parallel flow cold DRI Reformer Tube

اکنون تماس بگیرید

Production of centrifugal cast pipe

standard: Aisi, Astm, Din, Gb, Jis

Tube bundle for DRI TOPICN13088 Reformer Catalyst Tube Cast Refomer Tube -Feed gas heater cold tube bundle -Natural gas heater tube bundle -Feed gas heater hot tube bundle -Air recuperator parallel flow hot -Air recuperator parallel flow cold DRI Reformer Tube

اکنون تماس بگیرید

Centrifugal casting precision casting radiant tube

standard: Aisi, Astm, Din, Gb

Whether alloy: Is Alloy

Elbow for radiant tube Process: static casting W type radiant tube:mostly used on continuous annealing, vertical annealing furnace of galvanizing lines. In the nitrogen and hydrogen protection atmosphere, burning of natural gas or coke oven gas inside the tube heat the strip steel from room temperature to...

اکنون تماس بگیرید

Hearth roll heat-resistant stainless steel castings

standard: Aisi, Astm, Din, Gb

Whether alloy: Is Alloy

Item: Water seal roll TOPICN130052 Application: The furnace roll are usually used for normalizing furnace and hardening furnace, under the hydrogen nitrogen protective environment, CGL (Continuous hot dip galvanizing line),Plating aluminizing line, Plating silicon line. Process:Centrifugal/spun casting method for roll...

اکنون تماس بگیرید

stainless steel furnace roller

standard: Astm, Bs, Gb, Jis

tolerance: ±1%

Hearth rolls are large-diameter hearth rolls for continuous annealing production lines. The diameter:600-1500mm The barrel: centrifugal casting Transition section: static casting Shaft: forging. Common material: Shaft (SUS304, 1Cr18Ni9Ti, etc.), barrel and shaft neck (ZG30Cr26Ni12, ZG40Cr25Ni20Si2, ZG14Ni32Cr20Nb,...

اکنون تماس بگیرید

Fired heater for hydrogen generation reformer

مدل شماره: TOPICN

Hydrogen production plant of 14000 Nm³/h of Shijiazhuang Petrochemical Co. Fired Heater The coal chemical industry is an industry that has developed for a long time. During the long-term development process, the relevant technical level has been improved. At present, the technical level of coal chemical industry in my...

اکنون تماس بگیرید

Reformer for hydrogen plant

مدل شماره: TOPICN13012

standard: Aisi, Astm, Din, Gb

Fired Heater Hydrogen generation reformer 8000m3/h for SINOPEC Taizhou Company TOPICN13012 Steam reformer contains banks of catalyst filled tubes operating at temperatures around 850 to 1000oC to produce hydrogen or mixtures of hydrogen and carbon monoxide for use in further processes. Steam Superheater The tubes are...

اکنون تماس بگیرید

Steam superheater for chemical plant

مدل شماره: TOPICN13011

Steam superheatng for furnace for 320KTA Ethylbenzene/styrene unit for SP Chemicals TOPICN13011 A Fired Heater or Process Heater is used to effecting a chemical reaction in the feedstock (flowing inside tubes) through the application of heat from the controlled flame(s). Most refineries and chemical plants have...

اکنون تماس بگیرید

Four in one reformer furnace

مدل شماره: TOPICN13018

Fired heater for four-in-one reformer Steam superheatng for furnace for 320KTA Ethylbenzene/styrene unit for SP Chemicals TOPICN13011 Optimization of the reformer with the waste heat recovery section can be tailored to suit multiple design cases for varying feedstock, fuels, and steam requirements. Waste heat recovery...

اکنون تماس بگیرید

Reformer Tube by Spun Casted

standard: Aisi, Astm, Din, Gb, Jis

As the core part of a reformer, reformer tube is required to work in high-temperature environment which could be up to 1000°C. Besides, its operating pressure could be up to 3.5Mpa. These properties need the materials to be heat resistance, oxidation resistance and corrosion resistance. Such materials usually are...

اکنون تماس بگیرید

Fired heater for methanol plant

مدل شماره: TOPICN13017

Steam superheatng for furnace for 320KTA Ethylbenzene/styrene unit for SP Chemicals TOPICN13011 Reformer Furnace Many processes throughout the petrochemical industry are based on the use of hydrogen produced by the reforming process, where a hydrocarbon-steam mixture is converted into a hydrogen-rich gas in the...

اکنون تماس بگیرید

Hydrogen Generation Reformer Furnace Tube

standard: Aisi, Astm, Gb, Jis, Din

Hydrogen generation reformer is the main equipment in Hydrogen generating plant. It usually costs 20%-25% of the whole investment. In terms of structure, it is a comparatively complex type of furnace which is composed of radiation chamber, convection chamber, air preheater, and chimney etc.. The piping system of...

اکنون تماس بگیرید

Aromatization heating furnace produce line

مدل شماره: TOPICN13016

Steam superheating for furnace for 320KTA Ethylbenzene/styrene unit for SP Chemicals TOPICN13011 Steam Superheater In Oil & Gas segment fired heaters are an essential requirement for heating Thermic fluid, process fluids Feedstock, charge heating, steam heating, and thermal cracking. In the refinery segment of the...

اکنون تماس بگیرید

High temperature centrifugal casting furnace tube

Spun casting tube is widely used in refining, petrochemical and direct reduction plant (DRI), fertilizer industry. We are market leader in its production such as hydrogen generation furnace tube, Ethylene cracking furnace tube, tube assembly, tube coil, DRI reformer tube and other centrifugal casting tube and static...

اکنون تماس بگیرید

Type I high temperature resistant radiant tube

standard: Aisi, Astm, Din, Gb

Whether alloy: Is Alloy

Radiant Heater Tube U-type radiant tube:used for continuous annealing, galvanizing line of vertical annealing furnace. In nitrogen and hydrogen protection atmosphere, burning of natural gas or coke oven gas inside the tube heat the strip steel from room temperature to 750-950℃quickly and evenly through the outer tube...

اکنون تماس بگیرید

Socket type ductile ink drainage pipe dn100

Spun casting tube is widely used in refining, petrochemical and direct reduction plant (DRI), fertilizer industry. We are market leader in its production such as hydrogen generation furnace tube, Ethylene cracking furnace tube, tube assembly, tube coil, DRI reformer tube and other centrifugal casting tube and static...

اکنون تماس بگیرید

Ductile iron pipe k9 corrosion resistant centrifugal

Spun casting tube is widely used in refining, petrochemical and direct reduction plant (DRI), fertilizer industry. We are market leader in its production such as hydrogen generation furnace tube, Ethylene cracking furnace tube, tube assembly, tube coil, DRI reformer tube and other centrifugal casting tube and static...

اکنون تماس بگیرید

W type electric heating radiant tube

standard: Aisi, Astm, Din, Gb

Whether alloy: Is Alloy

A W-type radiant tube is an electron tube used in high-frequency electronic equipment, which consists of a glass tube with multiple electrodes. The tube gets its name from the layout of its electrodes, which are arranged in a "W" shape. W-type radiant tubes are mainly used to amplify, oscillate and modulate...

اکنون تماس بگیرید

Reformer tubes with Heat and Corrosion Resistance

standard: Aisi, Astm, Din, Gb, Jis

Catalyst Tube Our excellent quality reformer tubes with heat and corrosion resistance properties are mainly processed by spun casting. We could produce reformer tubes for Hydrogen generation, reformer tubes for DRI, and tube fittings such as cast tube sheets, cast Brackets and guides etc.. The usual materials are...

اکنون تماس بگیرید