Page-3 All Products - Fired Heater,Reformer Tube,Catalyst Tube,Convection Section,Centrifugal Casting Furnace Tube,Pressure Vessel

Industrial High Performance Furnace Rolls

standard: Astm, Bs, Gb, Jis

tolerance: ±1%

Hearth rolls are large-diameter hearth rolls for continuous annealing production lines. The diameter:600-1500mm The barrel: centrifugal casting Transition section: static casting Shaft: forging. Common material: Shaft (SUS304, 1Cr18Ni9Ti, etc.), barrel and shaft neck (ZG30Cr26Ni12, ZG40Cr25Ni20Si2, ZG14Ni32Cr20Nb,...

Contact Now

Elbow with complete specifications

standard: Aisi, Astm, Din, Gb

Whether alloy: Is Alloy

Elbow for radiant tube Process: static casting W type radiant tube:mostly used on continuous annealing, vertical annealing furnace of galvanizing lines. In the nitrogen and hydrogen protection atmosphere, burning of natural gas or coke oven gas inside the tube heat the strip steel from room temperature to...

Contact Now

Radiant Tubes for Industrial Heating Furnaces

standard: Aisi, Astm, Din, Gb

Whether alloy: Is Alloy

W type radiant tube TOPICN13043 Radiant Heater Tube W type radiant tube:mostly used on continuous annealing, vertical annealing furnace of galvanizing lines. In the nitrogen and hydrogen protection atmosphere, burning of natural gas or coke oven gas inside the tube heat the strip steel from room temperature to...

Contact Now

high quality Tube bundle for DRI

Model No.: TOPICN13088

standard: Aisi, Astm, Din, Gb

Tube bundle for DRI TOPICN13088 Reformer Catalyst Tube Cast Refomer Tube -Feed gas heater cold tube bundle -Natural gas heater tube bundle -Feed gas heater hot tube bundle -Air recuperator parallel flow hot -Air recuperator parallel flow cold DRI Reformer Tube

Contact Now

Production of centrifugal cast pipe

standard: Aisi, Astm, Din, Gb, Jis

Tube bundle for DRI TOPICN13088 Reformer Catalyst Tube Cast Refomer Tube -Feed gas heater cold tube bundle -Natural gas heater tube bundle -Feed gas heater hot tube bundle -Air recuperator parallel flow hot -Air recuperator parallel flow cold DRI Reformer Tube

Contact Now

Centrifugal casting precision casting radiant tube

standard: Aisi, Astm, Din, Gb

Whether alloy: Is Alloy

Elbow for radiant tube Process: static casting W type radiant tube:mostly used on continuous annealing, vertical annealing furnace of galvanizing lines. In the nitrogen and hydrogen protection atmosphere, burning of natural gas or coke oven gas inside the tube heat the strip steel from room temperature to...

Contact Now

Hearth roll heat-resistant stainless steel castings

standard: Aisi, Astm, Din, Gb

Whether alloy: Is Alloy

Item: Water seal roll TOPICN130052 Application: The furnace roll are usually used for normalizing furnace and hardening furnace, under the hydrogen nitrogen protective environment, CGL (Continuous hot dip galvanizing line),Plating aluminizing line, Plating silicon line. Process:Centrifugal/spun casting method for roll...

Contact Now

stainless steel furnace roller

standard: Astm, Bs, Gb, Jis

tolerance: ±1%

Hearth rolls are large-diameter hearth rolls for continuous annealing production lines. The diameter:600-1500mm The barrel: centrifugal casting Transition section: static casting Shaft: forging. Common material: Shaft (SUS304, 1Cr18Ni9Ti, etc.), barrel and shaft neck (ZG30Cr26Ni12, ZG40Cr25Ni20Si2, ZG14Ni32Cr20Nb,...

Contact Now

Fired heater for hydrogen generation reformer

Model No.: TOPICN

Hydrogen production plant of 14000 Nm³/h of Shijiazhuang Petrochemical Co. Fired Heater The coal chemical industry is an industry that has developed for a long time. During the long-term development process, the relevant technical level has been improved. At present, the technical level of coal chemical industry in my...

Contact Now

Reformer for hydrogen plant

Model No.: TOPICN13012

standard: Aisi, Astm, Din, Gb

Fired Heater Hydrogen generation reformer 8000m3/h for SINOPEC Taizhou Company TOPICN13012 Steam reformer contains banks of catalyst filled tubes operating at temperatures around 850 to 1000oC to produce hydrogen or mixtures of hydrogen and carbon monoxide for use in further processes. Steam Superheater The tubes are...

Contact Now

Steam superheater for chemical plant

Model No.: TOPICN13011

Steam superheatng for furnace for 320KTA Ethylbenzene/styrene unit for SP Chemicals TOPICN13011 A Fired Heater or Process Heater is used to effecting a chemical reaction in the feedstock (flowing inside tubes) through the application of heat from the controlled flame(s). Most refineries and chemical plants have...

Contact Now

Four in one reformer furnace

Model No.: TOPICN13018

Fired heater for four-in-one reformer Steam superheatng for furnace for 320KTA Ethylbenzene/styrene unit for SP Chemicals TOPICN13011 Optimization of the reformer with the waste heat recovery section can be tailored to suit multiple design cases for varying feedstock, fuels, and steam requirements. Waste heat recovery...

Contact Now

Reformer Tube by Spun Casted

standard: Aisi, Astm, Din, Gb, Jis

As the core part of a reformer, reformer tube is required to work in high-temperature environment which could be up to 1000°C. Besides, its operating pressure could be up to 3.5Mpa. These properties need the materials to be heat resistance, oxidation resistance and corrosion resistance. Such materials usually are...

Contact Now

Fired heater for methanol plant

Model No.: TOPICN13017

Steam superheatng for furnace for 320KTA Ethylbenzene/styrene unit for SP Chemicals TOPICN13011 Reformer Furnace Many processes throughout the petrochemical industry are based on the use of hydrogen produced by the reforming process, where a hydrocarbon-steam mixture is converted into a hydrogen-rich gas in the...

Contact Now

Hydrogen Generation Reformer Furnace Tube

standard: Aisi, Astm, Gb, Jis, Din

Hydrogen generation reformer is the main equipment in Hydrogen generating plant. It usually costs 20%-25% of the whole investment. In terms of structure, it is a comparatively complex type of furnace which is composed of radiation chamber, convection chamber, air preheater, and chimney etc.. The piping system of...

Contact Now

Aromatization heating furnace produce line

Model No.: TOPICN13016

Steam superheating for furnace for 320KTA Ethylbenzene/styrene unit for SP Chemicals TOPICN13011 Steam Superheater In Oil & Gas segment fired heaters are an essential requirement for heating Thermic fluid, process fluids Feedstock, charge heating, steam heating, and thermal cracking. In the refinery segment of the...

Contact Now

High temperature centrifugal casting furnace tube

Spun casting tube is widely used in refining, petrochemical and direct reduction plant (DRI), fertilizer industry. We are market leader in its production such as hydrogen generation furnace tube, Ethylene cracking furnace tube, tube assembly, tube coil, DRI reformer tube and other centrifugal casting tube and static...

Contact Now

Type I high temperature resistant radiant tube

standard: Aisi, Astm, Din, Gb

Whether alloy: Is Alloy

Radiant Heater Tube U-type radiant tube:used for continuous annealing, galvanizing line of vertical annealing furnace. In nitrogen and hydrogen protection atmosphere, burning of natural gas or coke oven gas inside the tube heat the strip steel from room temperature to 750-950℃quickly and evenly through the outer tube...

Contact Now

Socket type ductile ink drainage pipe dn100

Spun casting tube is widely used in refining, petrochemical and direct reduction plant (DRI), fertilizer industry. We are market leader in its production such as hydrogen generation furnace tube, Ethylene cracking furnace tube, tube assembly, tube coil, DRI reformer tube and other centrifugal casting tube and static...

Contact Now

Ductile iron pipe k9 corrosion resistant centrifugal

Spun casting tube is widely used in refining, petrochemical and direct reduction plant (DRI), fertilizer industry. We are market leader in its production such as hydrogen generation furnace tube, Ethylene cracking furnace tube, tube assembly, tube coil, DRI reformer tube and other centrifugal casting tube and static...

Contact Now

W type electric heating radiant tube

standard: Aisi, Astm, Din, Gb

Whether alloy: Is Alloy

A W-type radiant tube is an electron tube used in high-frequency electronic equipment, which consists of a glass tube with multiple electrodes. The tube gets its name from the layout of its electrodes, which are arranged in a "W" shape. W-type radiant tubes are mainly used to amplify, oscillate and modulate...

Contact Now

Reformer tubes with Heat and Corrosion Resistance

standard: Aisi, Astm, Din, Gb, Jis

Catalyst Tube Our excellent quality reformer tubes with heat and corrosion resistance properties are mainly processed by spun casting. We could produce reformer tubes for Hydrogen generation, reformer tubes for DRI, and tube fittings such as cast tube sheets, cast Brackets and guides etc.. The usual materials are...

Contact Now

High frequency studded tubes for heating furnace

Model No.: TOPICN13091

standard: Aisi, Astm, Din, Gb

Item: High frequency studded tubes TOPICN13091 Material: carbon steel, chrome molybdenum steel, stainless steel Studded tube shape: cylindrical, oval, SD Pressure Vessel Studded tubes also called nail-ribbed tubes, are widely used in the petrochemical industry, especially in the convection chamber of a tube heating...

Contact Now

Anti-static high temperature resistant silicone roller

Machined Casting Rubber coated roll TOPICN13058 Hardness(Shore): 30-90 Working temperature: -50℃~+250℃ Percentage elongation at rupture (%)<150 Feature: Heat resistance and cold resistance Machined Parts Machined Casting Parts

Contact Now